|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) STPS130A/U SCHOTTKY RECTIFIER MAIN PRODUCT CHARACTERISTICS IF(AV) VRRM Tj (max) VF (max) FEATURES AND BENEFITS s 1A 30 V 150 C 0.46 V s s s VERY LOW DROP FORWARD VOLTAGE FOR LESS POWER DISSIPATION OPTIMIZED CONDUCTION / REVERSE LOSSES TRADE-OFF ALLOWING THE HIGHEST EFFICIENCY IN APPLICATION SURFACE MOUNT MINIATURE PACKAGE AVALANCHE CAPABILITY SPECIFIED SMA STPS130A SMB STPS130U DESCRIPTION Single Schottky rectifier suited to Switched Mode Power Supplies and high frequency DC/DC converters. Packaged in SMA or SMB(*), this device is especially intended for use in parallel with MOSFETs in synchronous rectification and low voltage secondary rectification. (*) in accordance with DO214AA and DO214AC JEDEC ABSOLUTE RATINGS (limiting values) Symbol VRRM IF(RMS) IF(AV) IFSM IRRM IRSM PARM Tstg Tj dV/dt RMS Forward current Average forward current Surge non repetitive forward current Repetitive peak reverse current Non repetitive peak reverse current Repetitive peak avalanche power Storage temperature range Maximum junction temperature Critical rate of rise of reverse voltage TLead = 130C = 0.5 tp = 10 ms Sinusoidal tp = 2 s F = 1KHz tp = 100 s tp = 1s Tj = 25C Parameter Repetitive peak reverse voltage Value 30 7 1 45 1 1 1200 - 65 to + 150 150 10000 Unit V A A A A A W C C V/s 1/6 July 2003 - Ed: 4A STPS130A/U THERMAL RESISTANCES Symbol Rth (j-l) Junction to lead Parameter SMA SMB STATIC ELECTRICAL CHARACTERISTICS Symbol IR * VF ** Tests Conditions Reverse Leakage Current Forward Voltage drop Tests Conditions Tj = 25C Tj = 125C Tj = 25C Tj = 125C Tj = 25C Tj = 125C Pulse test : * tp = 380 s, < 2% ** tp = 5ms, < 2% Value 30 23 Unit C/W Min. Typ. 1.5 Max. 10 10 0.55 0.46 0.63 0.55 Unit A mA V VR = 30V IF = 1 A IF = 1 A IF = 2 A IF = 2 A 0.45 0.37 To evaluate the maximum conduction losses use the following equation : P = 0.37 x IF(AV) + 0.090 x IF2(RMS) Fig. 1: Average forward power dissipation versus average forward current. PF(av)(W) 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 0.2 0.4 IF(av) (A) 0.6 0.8 =tp/T T = 0.05 =1 = 0.1 = 0.2 = 0.5 Fig. 2: Average forward current versus ambient temperature (=0.5) . IF(av)(A) 1.2 Rth(j-a)=Rth(j-l) 1.0 0.8 0.6 0.4 0.2 tp Rth(j-a)=100C/W T 1.0 1.2 0.0 =tp/T tp Tamb(C) 50 75 100 125 150 0 25 Fig. 3: Normalized avalanche power derating versus pulse duration. PARM(tp) PARM(1s) 1 Fig. 4: Normalized avalanche power derating versus junction temperature. PARM(tp) PARM(25C) 1.2 1 0.1 0.8 0.6 0.01 0.4 0.2 0.001 0.01 0.1 1 tp(s) 10 100 1000 Tj(C) 0 0 25 50 75 100 125 150 2/6 STPS130A/U Fig. 5-1: Non repetitive surge peak forward current versus overload duration (maximum values). IM(A) 8 7 6 5 4 3 2 1 0 1.0E-3 IM t Fig. 5-2: Non repetitive surge peak forward current versus overload duration (maximum values). IM(A) 8 7 Ta=50C Ta=75C 6 Ta=50C 5 4 3 Ta=75C Ta=100C =0.5 2 1 IM t Ta=100C t(s) 1.0E-2 1.0E-1 1.0E+0 =0.5 t(s) 1.0E-2 1.0E-1 1.0E+0 0 1.0E-3 Fig. 6-1: Relative variation of thermal impedance junction to ambient versus pulse duration (epoxy printed circuit board, S(Cu)=35mm, recommended pad layout).(SMB) Zth(j-a)/Rth(j-a) 1.0 0.8 0.6 0.4 = 0.2 = 0.5 Fig. 6-2: Relative variation of thermal impedance junction to ambient versus pulse duration (epoxy printed circuit board, S(Cu)=35mm, recommended pad layout).(SMA) Zth(j-a)/Rth(j-a) 1.0 0.8 0.6 0.4 = 0.5 T = 0.2 T 0.2 = 0.1 Single pulse 0.2 tp(s) 1.0E+1 =tp/T tp = 0.1 Single pulse 0.0 1.0E-2 tp(s) 1E+1 =tp/T tp 1.0E-1 1.0E+0 1.0E+2 1.0E+3 0.0 1E-2 1E-1 1E+0 1E+2 1E+3 Fig. 7: Reverse leakage current versus reverse voltage applied (typical values). IR(A) 5E+3 1E+3 1E+2 1E+1 1E+0 1E-1 Tj=25C Tj=125C Fig. 8: Junction capacitance versus reverse voltage applied (typical values). C(pF) 500 F=1MHz Tj=25C 200 Tj=70C 100 50 20 VR(V) VR(V) 20 25 30 0 5 10 15 10 1 2 5 10 20 30 3/6 STPS130A/U Fig. 9: Forward voltage drop versus forward current (maximum values). Fig. 10-1: Thermal resistance junction to ambient versus copper surface under each lead (Epoxy printed circuit board, copper thickness: 35m).(SMB) Rth(j-a) (C/W) 120 P=1.5W IFM(A) 10.00 100 1.00 Tj=75C Tj=125C 80 60 Tj=25C 0.10 40 20 S(Cu) (cm) VFM(V) 0.01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 0 1 2 3 4 5 Fig. 10-2: Thermal resistance junction to ambient versus copper surface under each lead (Epoxy printed circuit board, copper thickness: 35m).(SMA) Rth(j-a) (C/W) 140 120 100 80 60 40 20 0 0 1 S(Cu) (cm) 2 3 4 5 P=1.5W 4/6 STPS130A/U PACKAGE MECHANICAL DATA SMA DIMENSIONS E1 REF. Millimeters Min. Typ. Max. Min. 2.30 0.15 Inches Typ. Max. A1 D 1.90 0.05 1.25 0.15 4.80 3.95 1.40 2.25 0.75 2.70 0.075 0.091 0.106 0.20 0.002 0.006 0.008 1.65 0.049 0.41 0.006 0.065 0.016 A2 b c E A1 A2 E2 L b E E1 c 5.20 4.30 1.65 2.60 1.15 5.60 0.189 0.205 0.220 4.60 0.156 0.169 0.181 1.90 0.055 0.065 0.075 2.95 0.089 0.102 0.116 1.60 0.030 0.045 0.063 E2 D L FOOT PRINT (in millimeters) 1.65 1.45 2.40 1.45 5/6 STPS130A/U PACKAGE MECHANICAL DATA SMB DIMENSIONS E1 REF. Millimeters Min. Typ. Max. Min. 2.15 0.15 Inches Typ. Max. A1 D 1.90 0.05 1.95 0.15 5.10 4.05 1.65 3.30 0.75 2.45 0.075 0.085 0.096 0.20 0.002 0.006 0.008 2.20 0.077 0.41 0.006 0.087 0.016 A2 b c E A1 A2 E2 L b E E1 c 5.40 4.30 1.90 3.60 1.15 5.60 0.201 0.213 0.220 4.60 0.159 0.169 0.181 2.15 0.065 0.075 0.085 3.95 0.130 0.142 0.156 1.60 0.030 0.045 0.063 E2 D L FOOT PRINT (in millimeters) 2.3 1.52 Ordering type STPS130U STPS130A s s 2.75 Marking G12 S130 1.52 Package SMB SMA Weight 0.107g 0.068g Base qty 2500 5000 Delivery mode Tape & reel Tape & reel Band indicates cathode Epoxy meets UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2003 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 6/6 |
Price & Availability of STPS130 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |